Lexicon MC-12 User Manual Page 165

  • Download
  • Add to my manuals
  • Print
  • Page
    / 194
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 164
Main Zone Audio Performance (continued)
Appendix
Lexicon
A-2
SPECIFICATIONS
Audio Input & Output Connectors
• 8 stereo (RCA) or 5 stereo and one 5.1-channel
connectors
6 S/PDIF coaxial (RCA), 6 S/PDIF optical (5 TosLink and
1 optical mini jack), and 1 AES/EBU (XLR) connectors
Coaxial and optical input connectors conform to IEC-
958, S/PDIF standards
Accepts 44.1, 48, 88.2, and 96kHz sample rates
Accepts 16-24 bits PCM audio, Dolby Digital, dts, and
dts-ES discrete data formats
12 unbalanced (RCA) and 12 balanced (XLR, MC-12
Balanced only) connectors for Front L/R, Center, LFE,
Subwoofer L/R, Side L/R, Rear L/R, and Auxiliary L/R
2 unbalanced (RCA, 1 fixed and 1 variable output level)
stereo connectors and 1 balanced stereo connector
(XLR, variable output level, MC-12 Balanced only)
2 unbalanced (RCA, 1 fixed and 1 variable output level)
stereo connectors
1 S/PDIF coaxial (RCA) and 1 S/PDIF optical (TosLink)
connector (in parallel)
Analog Audio Inputs
Digital Audio Inputs
Zone 2 Audio Outputs
Main Zone Audio
Outputs
Record Zone Audio
Outputs
Below 0.003% at 1kHz, maximum output levelTHD + Noise
Main Zone Audio Performance
24-bit, 96kHz, dual-bit ∆∑ architecture
24-bit, 44.1 to 192kHz, multi-bit ∆∑ architecture,
operating in dual-mono mode
A/D Conversion
D/A Conversion
10Hz to 20kHz, +0.1dB/-0.25dB, -0.75dB at 40kHz,
reference 1kHz
Frequency Response
Zone 2 & Record Zone Audio Performance
24-bit, 44.1 to 96kHz, dual-bit ∆∑ architecture
(Record Zone only)
24-bit, 44.1 to 192kHz, multi-bit ∆∑ architecture
A/D Conversion
D/A Conversion
10Hz to 20kHz, +0.1dB/-0.25dB, -0.75dB at 40kHz,
reference 1kHz
Below 0.005% at 1kHz, maximum output level
Frequency Response
THD + Noise
100k in parallel with 150pF
150mVrms typical, 6Vrms maximum (RCA connectors)
300mVrms typical, 12Vrms maximum (XLR connectors,
MC-12 Balanced only)
Maximum value with full-scale input signal and volume
at +12dB
100 in parallel with 150pF (RCA connectors)
•50 in parallel with 150pF (XLR connectors, MC-12
Balanced only)
Input Impedance
Output Level
Output Impedance
108dB minimum, 111dB typical, 22kHz bandwidth
108dB minimum, 111dB typical, 22kHz bandwidth
Dynamic Range
Signal-to-Noise Ratio
200mVrms (2Vrms for maximum output level) at 0dB
input gain
Input Sensitivity
105dB minimum, 108dB typical, 22kHz bandwidthDynamic Range
Specifications are subject to change without notice.
Page view 164
1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 193 194

Comments to this Manuals

No comments