Lexicon CP-1 User Manual download pdf (Page 28)

Page 24

Lexicon

Reverb

The Programs:

Reverb

The Reverberation program differs from Ambience in that it does not

simulate the early reflections of specific halls, but emphasizes rich, smooth

reverberant decay in small, medium or large spaces. It works well for

simulating a space with a long reverberation times relative to its size, such

as a reverberant chamber, church or the like. For systems with only two

loudspeakers, Reverb also incorporates a version of Panorama that will

spread the stereo image and add the reflections it generates to the expanded

sound stage.

The initial EFFECT LEVEL is highest for Program 7 and progressively

lower for Programs 8 and 9. It will be easier to hear exactly what the

parameters do if the EFFECT LEVEL is temporarily turned all the way up.

Program

Parameters

* 0 if side speakers are specified

EFFECT LEVEL adjusts the loudness of the side and rear speakers. When

there are no side speakers, it adjusts the amount of ambient signal mixed

into the main loudspeakers. EFFECT LEVEL is the most important user

adjustment in AMBIENCE and REVERB, and has been given its own button

on the remote. It should be set as high as possible without making the extra

speakers individually audible.

Effect Level

MID RT

BASS RT

TREBLE

PANORAMA EFF

LISTENER POS

SPEAKER ANGLE

PRE-DELAY

SET PROGRAM NAME

MEMORIZE PROGRAM

small-0.46 sec

medium - 0.92 sec

large - 2.16 sec

small-x1 MID RT

medium-1.25xMID RT

large-1.25xMID RT

s/m/l=5.9/4.2/3.6 kHz

0/28*

128

51 degrees

0.32 - 2.8 sec

0.64 - 5.6 sec

1.28 - 11.2 sec

0.7 xMID RT

1 xMID RT

1.25xMID RT

329 Hz - 14.1 kHz

1-32

0-254

33-91 degrees

Parameter Initial Value Range

0-120 ms

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 57 58

Comments to this Manuals

No comments

Lexicon CP-1 User Manual Page 28

Comments to this Manuals